To set up a motorcycle group ride in Ridekin, the leader signs in, starts a group ride, shares the invite link in the group’s usual chat and imports the route as a GPX. Each rider opens the link to join, and the whole group shows on one map. When the group spreads out, any rider can send a regroup push.

Ridekin is free, no ads, nothing to buy; Android now, iOS coming. The walkthrough below assumes everyone has an Android phone. If one of your riders is on an iPhone, read the FAQ at the bottom first, because that changes how much you lean on the briefing.

What you need before the five minutes start

The setup itself is quick. What makes it slow is doing it at the meeting point with engines running. Sort these out the night before:

  • An Android phone per rider. The leader wants it on a handlebar mount. Riders in the middle can keep it in a pocket and still show up on the map.
  • The route as a GPX file, if there is a planned route. A track you recorded on an earlier ride works, as does a file exported from a planner. If you are not sure which kind of file you have, GPX track vs route explains why it matters.
  • The messenger your group already uses. Ridekin has no chat, so the invite link travels through WhatsApp, Signal, Telegram or a plain text message.
  • A USB charger on the bike for anything longer than half a day.

The pre-ride planning checklist covers the rest of the night-before work: fuel stops, the time budget and the rules you agree in writing.

Group ride setup, step by step

  1. Sign in. Open Ridekin and sign in. Every rider does this once.
  2. Start a group ride. The leader starts it. The rider who starts the ride is the one the group follows.
  3. Share the invite link. Copy it and paste it into the group chat. Each rider opens it and joins the group ride in the app. Send it before anyone leaves home, so the last rider to arrive is not setting up while the rest are pulling out.
  4. Load the leader route. Import the GPX as the leader route. The line appears on every member’s group map, so the rider at the back sees the same way as the rider at the front.
  5. Check visibility. Members of the group ride see each other on the group map. The visibility pill decides whether riders outside your group can see your area. It is hidden by default; each rider can pick “my group” or “group + riders nearby”, then a timer: 1 h, 4 h or until I stop. Riders nearby never see a pin, only an area of about a kilometre.
  6. Ride. Phones go into mounts or pockets. Start recording if you want the ride saved; it runs in the background with the screen off.
  7. Regroup when the group spreads. When the tail falls out of sight, any rider can send a regroup push and everyone pulls in at the next safe, agreed place.
  8. Keep the recording. After the ride, each rider who recorded has stats, a GPX export and a share link for anyone who stayed home.

What each rider sees on the group map

What Leader Member Needs a phone signal
Live positions of the group Sees everyone Sees everyone Yes
The leader route line Loads it Follows it No, once it is loaded
Regroup push Can send it Can send it Yes
Own ride recording Yes Yes No
What riders outside the group see Nothing, or an area of about 1 km if chosen Nothing, or an area of about 1 km if chosen Yes

Positions update every few seconds while there is coverage. When a rider rides into a dead zone, their marker stops moving until the phone finds a signal again. It does not mean they stopped.

The regroup push: when to send it

A regroup push tells everyone in the group ride “Regroup at the next stop”. It does not choose that place for you, and it does not replace a plan. Agree in the briefing what the push means: “next fuel station”, “next lay-by on the left” or “the regroup point we named”. The regroup points guide covers how to pick places that are safe to stop at.

Three habits keep it useful:

  • Send it for a real gap, not every red light. If the tail is out of sight for a couple of minutes, send it. If two riders caught a light, wait for them at the next junction as you would without the app.
  • Nobody reads a notification while moving. The push is a cue to look for the next safe stop. Harley-Davidson’s group riding advice puts it plainly: “Always put personal safety ahead of staying with the group.”
  • Agree who sends it. Any rider in the group can, which helps when the sweep is the one who sees the gap. Name one or two senders in the briefing so the group does not stop in three places at once.

Android battery setup for an all-day ride

Live positions and recording use GPS, so battery use goes up. The bigger risk is Android pausing the app in the background to save power, which is how a recording ends at the first fuel stop. Before the ride:

  • Allow background use for Ridekin. In Settings, find Ridekin in the app list, open its battery settings and allow it to run in the background. Depending on the Android version and phone maker the option has a different name, such as Unrestricted; Google’s Pixel battery help shows one current layout.
  • Keep Battery Saver off for the ride, or set its schedule so it does not kick in at 20 percent halfway up a pass. The steps are on Android’s battery help page.
  • Check your phone maker’s own sleep list. Some manufacturers add one on top of Android’s settings. Their support page names it.
  • Plug into the bike on long days. A phone on a mount in the sun also gets hot, so a mount with some airflow helps.

From the road

On a 2012 UKGSer thread about drop-off systems, one rider described how his group used to handle the route: it lived on the leader’s sat-nav, which was “probably in tank bag with no sound.” Everyone else navigated by following the bike in front. Another rider answered that “with phones, it’s dead easy these days.” He had a point, with a condition: the phones have to be set up before the ride, the link shared before the car park, and the line on every map, not only the front one.

Common mistakes

  • Picking a 1 h timer for a five-hour ride. If you chose to let riders nearby see your area, the timer runs out at the coffee stop. Use until I stop for a full day.
  • Sharing with riders nearby for no reason. The group map covers the group. Leave visibility hidden unless you want riders outside the group to see your area.
  • Loading a planner’s route file instead of a track. The line can come out different from what the leader planned. Export a track.
  • Treating the app as the briefing. The road captain checklist still applies: who leads, who sweeps, what the regroup push means.

Limits worth knowing

Live positions, the regroup push and SOS need a phone signal. Recording and following the route line keep working without one. There is no chat and no rerouting: if you leave the line, ride back to it. SOS is manual and goes to your group and to riders nearby who opted in. It is not an emergency service and does not call 112 or 911, so after a crash, call your local emergency number first. The details are in what motorcycle SOS apps can and cannot do.

Sources