You can track ATV and UTV rides for free with a phone: the app records the loop in the background with the screen off, saves it as a GPX file you can send to the group, and lets you follow the same line next time with an off-route alert. What a free recorder will not give you is the trail map itself.
That split matters more on a quad than on a street bike. A recorded track tells you where you went. It does not tell you whether the trail is open to machines over 50 inches, whether the gate at the bottom is seasonal, or whether the wash you crossed last spring is still there. Keep those two jobs apart and a free tracker does its part well.
What does a free ATV ride tracker actually record?
A ride tracker logs your GPS position every few seconds and joins the points into a line. From that line it works out the numbers riders argue about after a day out, such as distance, time and speed. In Ridekin each ride lands in your ride history with its stats.
The line is the part you will use again. It is a plain record of where your tires went, including the dead-end spur you backed out of and the loop you did twice because someone wanted another run at the hill climb. Before you share it, tell the group which bits to skip; a GPX that sends the next group up a dead end is worse than no GPX.
GPS has limits under a canyon wall or heavy tree cover. Riders on Maverick Forums describe tablets that “draw straight lines from loss to regain” when the signal drops in the mountains. A phone does the same. Expect a few short cuts across switchbacks in steep country, and do not treat the recorded mileage as survey grade.
Free tracker or trail map app: what each one covers
The ATV app search results are mostly onX Offroad, and it does a different job. Per the onX Offroad pricing page as of October 2026, the free version includes satellite and topo maps, one saved offline map and trip tracking; a $34.99-a-year tier adds open and closed off-road trails and unlimited offline maps; the $99.99 tier adds property boundaries and landowner names. If you need to know where you are allowed to ride, that is the kind of data you are paying for. Polaris owners have Ride Command on the dash; its App Store listing says Group Ride needs cellular and shows the last known location of riders when signal drops. A phone app is what the rest of a mixed group can run.
| Job | Free recorder (Ridekin) | Trail map app or land manager |
|---|---|---|
| Record the loop, screen off | Yes | Varies by app |
| Stats after the ride | Yes | Varies by app |
| GPX export and import | Yes | Varies by app |
| Live positions of your group | Yes, with phone signal | Varies by app |
| Trail network and difficulty | No | Yes |
| Open, closed, legal for your machine | No | Yes |
| Maps without signal | No | Varies; often a paid tier |
The two work together. Find and check the trail in a map source you trust, then record and share what you actually rode. Ridekin is free, with no ads and nothing to buy; it is on Android now, and iOS is coming.
Trailer to trailer: setting up a recorded ATV ride
This is the whole flow, from unloading to strapping down again. It takes a couple of minutes the first time.
- Sign in at home, on Wi-Fi. Do it before the trip, not at a staging area with one bar.
- Choose your visibility before you unload. You are hidden by default. For a group day, pick “my group” and a timer of 4 h or “until I stop”. If you also want riders nearby to know you are around, they see an area of about a kilometre, never a pin.
- Start or join the group ride. The leader shares the invite link in the group’s usual messenger. Everyone who joins shows up on the group map while they have signal.
- Start recording before you roll off the trailer. Then lock the screen. Recording carries on in the background. GPS still uses battery, but the screen is usually the bigger drain, so keep it dark until you need it.
- Ride. Leave the phone in the mount or a chest pocket. You do not need to touch it until lunch.
- Stop recording back at the trailer, before you load up. A track that ends on the highway home drags your average speed and adds a road section nobody wants in the GPX.
- Review the stats while everyone is still there. It settles the “how far was that” argument.
- Export the GPX and send it to the group, or send the share link if some of them just want to look at it.
- Next time, import that GPX and follow the line. You get turn hints along the way and an off-route alert if you leave it.
Sharing the trail with your group
GPX is the format almost every GPS app reads, so whoever gets the file can open it in what they already use. Post it in the group chat with a line about conditions: “dry, two water crossings, the climb after the fence line is rutted”. That sentence is worth as much as the file.
The share link is for people who want to see the ride, not follow it. It opens the ride in a browser, so nobody needs the app to look at it. Use it for the friend who could not make it, or for the group thread after a long day.
Before you share, think about where the line starts. A track that begins at your house, your cabin or a private gate tells people where you keep your machines. Start recording at the staging area instead.
Following the same line next time
Imported lines are followed exactly as they were drawn or recorded. Ridekin does not snap an off-road GPX to roads or to a trail network, and it does not reroute you, because off-road there is nothing for it to route on. If you get the off-route alert, stop, find the line on screen and ride back to the last place you were on it. There is more on reading a line in the dirt in how to follow a GPX line off-road without rerouting, and on what to send in GPX track vs route.
Following your line keeps working without a phone signal, and so does recording. Live group positions and the regroup push need signal and pick up again when it returns. If the group is going to split on a big trail system, agree where you meet before the bars go; the ATV and UTV group ride guide covers spacing and regroup rules.
A typical case: the wash that moved
Picture a wash crossing after rain, which is where an off-route alert tends to earn its keep. You re-run a recorded desert loop a few weeks after a storm. The old crossing has silted over, and a fresh set of tracks goes straight up the other bank. The fresh tracks look like the trail. The alert goes off a short way up them, the line on screen shows the old crossing a little downstream, and the group rides back to it. No drama, just a stop and a look instead of a mile of somebody else’s guess. Access rules still sit with you: before you follow anyone’s GPX, check the trail is open, using sources like Arizona State Parks’ responsible OHV guidance or your state’s OHV program.
Common mistakes with ATV ride tracking
- Forgetting to stop the recording at the trailer. The track then includes the drive to the gas station and home.
- Sharing a GPX without a word about conditions. The line does not show the washout, the closed gate or the new fence.
- Treating someone’s GPX as permission. A line in a file proves someone rode there once. It says nothing about whether the trail is open to you today.
- Expecting live positions in a canyon. The group map needs signal. Plan regroup points for the stretches without it.
- Leaving visibility on after the ride. Use the 1 h or 4 h timer so it switches off on its own.