If you are lost or broken down on an ATV trail, stop and stay with your machine on the trail unless staying is clearly worse. Check that nobody is hurt, check the phone for signal and for the track you recorded, then try the group by radio or phone. Your group will come back the way it rode, so the trail is where they look first.
What follows is the order to do things in, the stay-or-move call, and an honest look at what a phone can do once the bars are gone. If you are on two wheels, the breakdown guide for the first 15 minutes covers the bike side of this.
The first ten minutes, in order
Panic makes people ride further in the wrong direction. A fixed order stops that.
- Stop where you are and switch the engine off. Do not push on to see what is around the next bend. Every turn you add is one more turn the group has to guess.
- Check people before machines. Anyone hurt, cold, out of water? If someone is badly hurt, call your local emergency number now if you have any signal at all.
- Get the machine to the side of the trail where an oncoming rig can see it, not over a blind crest.
- Look at the phone. Note the signal, the battery and the time. If you were recording, the track you rode in is on the screen.
- Try the group. Radio first, then a call or message if you have signal.
- Decide stay or move, using the table below, and tell the group which you chose if you can reach them.
- Make yourself easy to find. Lights on, something bright on the machine, and stay within sight of the trail.
Stay with the machine or move?
Most search advice starts from staying put, and the ATV version has a folk rule of its own. Riders on RZR Forums describe a separated rider who “climbs the nearest-tallest hill and waits” and uses the radio if he can (forum excerpt from an older thread). High ground helps both radio and phone, but keep the machine and the trail in view.
| Situation | Stay | Move |
|---|---|---|
| Machine broken, group knows your route | Stay on the trail with it | Only to the nearest high point in sight |
| Separated, unsure where the group went | Stay at the last junction you all passed | Back to the last agreed regroup point, if close |
| Rider injured | Stay with them | One rider rides out to signal or help, with a radio |
| Dark or weather coming, nobody knows your plan | Stay if the way out is unclear | Out along your recorded way in, if the machine runs and the way is certain |
| Out of fuel | Stay | No |
The Dairyland ATV group ride tips make the same point from the other side: agree before the ride how you get help if someone is separated, and know more than one way out of the trail system.
Last-known position and the recorded way in
When you lose the group, the useful question is where everyone was last seen. Polaris Ride Command handles this openly: its App Store listing says Group Ride needs cellular and shows the last known location of riders until signal returns. A phone-based group map, Ridekin’s included, has the same limit: without signal, positions stop updating, so whatever you saw last is where people were, not where they are.
That still shortens a search. If the last place anyone saw the missing rider was a junction, that junction is where you go back to, not further forward. And if you started recording at the trailer, the line you have already ridden is the way back. Recording keeps going without signal, so the track keeps growing even in a canyon. More on what keeps working without bars in no signal on the ride: what still works.
Getting through to the group: GMRS, horn, high ground
Radio is the backbone for most side-by-side groups. Dirt Wheels puts it plainly: as many rigs as possible should have GMRS radios on the agreed frequency, “especially lead and sweep”. Two practical details matter when you are the one who is lost:
- The radio belongs on you, not on the machine. If you walk to high ground, it goes with you. A RadioReference thread also warns that the ranges on the packaging assume ideal conditions such as mountaintop to mountaintop.
- Everyone has to be on the same system. GMRS and business-band radios do not talk to each other. In the US, the FCC rules say plainly that “a valid individual license is required to operate a GMRS station” (47 CFR 95.1705).
No radio? Three horn blasts, repeated at intervals, carry further than shouting. So does a whistle.
What SOS to the group needs, and what a satellite device adds
A phone SOS is only as good as the signal under it. In Ridekin, SOS is manual: you press it, and it goes to your group and to riders nearby who opted in. It needs a phone signal. There is no crash detection. It is not an emergency service and does not call 911 or 112, so if someone is hurt, call your local emergency number first and use SOS to tell the people closest to you. Whether anyone can come depends on who is around and has signal.
Where there is no coverage at all, the alert cannot leave the phone. That gap is what satellite devices cover. A satellite messenger or a phone with satellite emergency texting can get a message out from places a cell network never reaches, which is why riders who go deep often carry one alongside the phone. Ridekin is not a satellite messenger and does not replace one.
Broken down: the plan at the trailer and the tools at the trailhead
Most breakdowns are fixed by whoever carries the right part. The plan you leave behind and the kit you ride with matter more than anything you do once you are stuck.
Leave a note on the dash with the loop, the names and phone numbers in the group, and your expected return time. Send the same to someone at home. A rider on RZR Forums sums up the deal with the person at home: if they do not get a call by a certain time, there is a problem (forum excerpt, older thread). Pick that time honestly, with room for a slow day.
At the trailhead, find out who carries what. A winch, a tire plug kit, a spare drive belt for your model, a tow strap. In Ridekin a tools signal says that out loud: riders nearby see that someone with tools is around, shown as an area of about a kilometre, never where your truck is parked. More on that in host, tools and coffee signals. Check your state’s OHV rules before you go, and ride only on designated trails, as the ATV Safety Institute’s Golden Rules advise.
A common breakdown: the belt that was already in someone’s truck
A common version of this story goes like this. A side-by-side loses its drive belt a long way past the last water crossing, no signal, the rest of the group already out of sight. The driver stays on the trail, and the sweep comes back along the route as agreed. The fix is quick because one truck at the trailhead has a spare belt for that model, and somebody asked who carried what before the ride. The lesson is boring: the plan at the trailer does the work.
For the regroup rules that stop separations in the first place, read ATV and UTV group rides: spacing, signals and regroups.
Sources
- ATV Safety Institute, Golden Rules and state rules (accessed October 2026)
- Dairyland Insurance, ATV group ride safety tips (accessed October 2026)
- Dirt Wheels, 20 off-roading tips (accessed October 2026)
- Polaris app, Ride Command group ride and last known location (App Store, accessed October 2026)
- 47 CFR 95.1705, GMRS individual licenses required (Cornell LII, accessed October 2026)
- RZR Forums, group ride and riding rules threads (rider excerpts, pre-2023)